- The daily life of a Chimney Sweep
- What the heck are Aldehydes?
- The importance of hiring a experienced chimney sweep
- One option for a fireplace that has seen better days
- The potential hazards of new construction
- Tip of the day – Pooling water
- Potential hazards of older homes
- Attic dangers
- Inspection of the day – Active water intrusion
- Fireplaces in vacation rentals – are they safe?
Our News
Keep up to date with Jacksonville Chimney Pros News & Tips
The dangerous flip
As a chimney sweep, you see the good, bad, and dangerous when it comes to chimney work performed before a sale. One of my recent inspections uncovered the dangerous side. The home had recently been purchased from a flipper and the clients were interested in having the fireplace inspected for use this Winter. A home inspection had already been performed with no mention of any issues with the fireplace but here is what I found: Here is...
Inspection of the day – Not a good idea!
So this was a particularly scary inspection to say the least! The back story is that the client was having issues with water intrusion leaking onto the ceiling around the chimney. Let's make this one interactive... Starting in the attic I see that getting to the chimney area is not going to be easy! After maneuvering around and crawling on the trusses/insulation, I make it to the chimney. The moisture meter and infrared imaging pick...
The importance of clean drop cloths
As a professional chimney sweep, I do everything in my power to make sure that my client's home stays spotless throughout the service. One key thing that all chimney sweeps should consider is how often they are washing their drop cloths. Over the years I have seen both ends of the spectrum from fellow sweeps but I personally only use them once before washing them. It only takes one dirty drop cloth to ruin a expensive rug or...
-
One option for a fireplace that has seen better days
Sometimes the elements win the battle against a fireplace, especially ones that have gone several years without maintenance. The fireplace above was...
-
The potential hazards of new construction
One concern I see on a regular basis is the lack of regulation with chimney installations, including new construction. For reference here is the...
-
Tip of the day – Pooling water
Water intrusion can be a costly headache but avoided if caught in time. This morning I inspected a chimney system with pooling water and...
-
Potential hazards of older homes
I love working on older systems, partially due to working on several hundred growing up and living in a home built in 1926. Older homes have amazing...
-
Attic dangers
When inspecting a chimney system it is key to inspect the attic where the flue passes through. It may be extremely difficult to access for some...
-
Inspection of the day – Active water intrusion
My first appointment today was a active water leak coming down from the pre-fabricated fireplace and onto the front tile and the new wood floors!...
The Chimney Safety Institute of America recommends that open masonry fireplaces should be swept at 1/8″ of sooty buildup, and sooner if there is any glaze present in the system. This is considered to be enough fuel buildup to cause a chimney fire capable of damaging the chimney or spreading to the home. Factory-built fireplaces should be swept when any appreciable buildup occurs. The logic is that the deposit is quite acidic and can shorten the life of the fireplace.
Schedule An Inspection
Call (904) 678-1790 Or Click the Link To the Right to Schedule Your Next Service Right Away